NILE AIR CUTTERS MP35A
FEATURE
- Booster connected type air cutters.
- If the MR model power is insufficient.
- If there is an air pressure restriction.
- If the pressure point is more distant than the fulcrum due to a separately prepared replacement blade.
- Optimal for cases of insufficient compressed air as air pressure is regulated.
MP type specification
Model | Length | Weight | Grip Size | Air Comsumption | Power | Air Pressure |
(less blade) | (mm) | (g) | φ (mm) | (cm3/stroke) | N (approx.) | (Mpa) |
MP35A | 283 | 830 | 56 | 1.146 | 10.118 | 0.5~0.6 |
MP type blaade cutting capacity
Model | Blade | Copper Wire | Steell Wire | Stainless Wire | Piano Wire | Crimping | Plastic | |
(*) Carbide Type | Soft | Hard | ||||||
MR35A | S7P, P8P, S7PS, CR8P, EP10P, P8PS | 4.8 | 4.0 | 2.8 | - | - | - | - |
Z8P*, Z8PS, ZCR8P, ZEP10P | 4.8 | 4.0 | 2.8 | 1.2 | - | - | - | |
F9P, F9PS, FD9P, FEP10P | - | - | - | - | - | 13.0 | 6.5 | |
Y8P, K8P, Y817P, SH8P | - | - | - | - | - | - | - | |
A8P-1.25/2.0/5.5, A8WP-1.25-2.0/2.0-5.5 | - | - | - | - | 1.25/2.0/5.5 | - | - | |
AR8P-1.25/2.0/5.5 AR8WP-1.25-2.0/2.0-5.5 | - | - | - | - | 1.25/2.0/5.5 | - | - |