TPHK8, 12T
Vertical Multistage Centrifugal Pump
Seri WALRUS TPHK adalah pompa sentrifugal multistage vertikal, dirancang untuk keperluan industri, khusus untuk peralatan mesin, untuk membawa cairan seperti air, cairan pendingin, oli ringan dan hal-hal bersih dan non-agresif lainnya:
- Sistem sirkulasi industri
- Sistem pencucian / pembersihan
- Sistem filtrasi
Pump Construction:
Pompa sentrifugal multistage vertikal immersible, pompa co-aksial / desain motor, impeler dipasang pada poros motor yang diperluas. Bagian kerja utama dibuat menggunakan stainless steel
Operating Condition:
Suhu Sekitar :: Maks. + 40 ° CLiquid Kisaran Suhu: + 0 ° C ~ + 90 ° C Tekanan Operasi: Maks. 10 kg / cm² Kedalaman terendam: Min. 65mm
Frekuensi: 60/50 HzVoltage: 220V / 380V
Kelas Enklosur: Kelas Isolasi IP54: F.
Maximum 8 Stages
Motor :
Kecepatan Nominal: 3500/2900 rpmFrekuensi: 60/50 HzVoltage: 220V / 380V
Kelas Enklosur: Kelas Isolasi IP54: F.
Specification
Model | Phase (Ø) | Voltage code | Cycle (Hz) | Volts (V) | Input Power (W) | Ampere (A) |
---|---|---|---|---|---|---|
TPHK4T2-1 | 3 | A3Z | 50 | 200-255 / 380-440 | 570 | 1.9-2.8 / 1.2-1.7 |
60 | 200-255 / 380-480 | 600 | 2.3-2.3 / 1.4-1.4 | |||
TPHK4T2-2 | 3 | A3Z | 50 | 200-255 / 380-440 | 650 | 2.2-2.9 / 1.4-1.7 |
60 | 200-255 / 380-480 | 960 | 3.0-2.7 / 1.7-1.7 | |||
TPHK4T3-3 | 3 | A3Z | 50 | 200-255 / 380-440 | 850 | 3.1-3.6 / 1.8-2.1 |
60 | 200-255 / 380-480 | 1290 | 4.0-3.6 / 2.4-2.4 | |||
TPHK4T4-4 | 3 | A3U | 50 | 200-240 / 380-415 | 1080 | 3.4-3.5 / 2.0-2.0 |
60 | 200-240 / 380-440 | 1620 | 4.5-5.0 / 2.9-2.9 | |||
TPHK4T5-5 | 3 | A3U | 50 | 200-240 / 380-415 | 1440 | 4.9-6.8 / 3.0-3.8 |
60 | 200-240 / 380-440 | 2100 | 6.2-6.0 / 3.5-3.5 | |||
TPHK4T6-6 | 3 | A3U | 50 | 200-240 / 380-415 | 1740 | 6.3-9.9 / 4.2-5.5 |
60 | 200-240 / 380-440 | 2400 | 7.7-7.6 / 4.5-4.5 | |||
TPHK4T7-7 | 3 | A3U | 50 | 200-240 / 380-415 | 2140 | 6.9-10.3 / 4.5-5.8 |
60 | 200-240 / 380-440 | 2800 | 8.7-8.4 / 4.9-4.9 |
Dimensions(mm)
![]() |
|