Sliding Air Cutter

 SLIDING AIR CUTTERS (FOR PLASTICS)

SN-series:

Pull & Cut type[SN3 / SN5 / SN10 / SN20]
SNP-series: Push & Cut type[SNP3 / SNP5 / SNP10 / SNP20]

1.  The unit travel distance is freely adjustable within 0-5 mm.
2.  The blade opening is adjustable by turning the adjusting bolt.
3. Tube connection air inlet is installed for one touch quick connection with air hose.
4. Any special cutting blade can be designed and manufactured to meet your application even for 1 piece.
5. Cutting units are guided with parallel rails while traveling assuring the minimum play in vertical and horizontal direction.
6. Blade holder can be set on the stand base at 90°angle either to left or right as illustrated.(Expecting SN3, SNP3.)

(Loosen counter-sunk screws and cap bolts, then turn blade holder plate together with piston and ring to the desired position and fix.)

Cutting Capacity (ABS Plastic):

• [SN3 /SNP3]φ2mm.
• [SN5 /SNP5]φ3mm.
• [SN10 /SNP10]φ4mm.
• [SN20 /SNP20]φ5mm.

Optional blades:

• [FN10] for SN3.
• [FNP10] for SNP3.
• [FN1] for SN5.
• [FNP1] for SNP5.
• [FN3] for SN10.
• [FNP3] for SNP10.
• [FN5] for SN20.
• [FNP5] for SNP20.

Read More

duct and mould cutters

DUCT AND MOULD CUTTERS

 

Part number

• SX15 (standard type)
• SX25 (long blade type)
• DX80 (ratchet type)
• DK55 / DK65 (end cutting type)

 Feature

Blade, plastic plate, spring can be replaced easily.
Cleanly cut section.

Blade type:
[X15] for SX15.
[X25] for SX25.
[X80] for DX80.

Plastic plate type:
[PB-SX15] for SX15.
[PB-SX25] for SX25.

Spring type:
[MBN-12] for SX15.

Cutting capacity:
[DK55 / DK65] φ8mm.

Read More

miniature nipper

MINIATURE NIPPERS & PLIERS

Part number

• 01 (miniature nippers)
• 02 (miniature nippers / tip edge type)
• 03 (miniature nippers)
• 04 (miniature nippers / blade back side scooped out)
• 05 (miniature nippers / with stripping hole)
• 06 (miniature needle pliers)
• 07 (miniature bent nose pliers)
• 08 (miniature flat nose pliers)
• 09 (miniature semi needle pliers)
• M10 (miniature long needle pliers)
• M11 (miniature plastic cutting nippers)
• M12 (miniature plastic cutting nippers)
• M13 (miniature needle pliers / serrated)
• M14 (miniature side cutting pliers / serrated)
• M15 (miniature chain nose pliers)
• M16 (miniature end cutting nippers)
• PC1 (PC forming pliers / for bending lead wires)
• PC2 (PC forming pliers / for bending lead wires)
• PC3 (PC bent nose pliers / for grasping in narrow and deep spaces)
• PC4 (PC nippers / for cutting in narrow spaces)
• PC5 (PC nippers / for cutting beyond certain articles)
• PC6 (PC end cutting nippers / for cutting in deep spaces)

Feature

with opening spring.

Cutting capacity:
[01 / 02 /03 / 04 / 05 / M16 / PC6] steel-wire φ0.5mm, copper-wire φ0.8mm.

[M14] steel-wire φ1.2mm, copper-wire φ2mm.
[M11 / M12] soft-resin φ3mm.
[PC4] steel-wire φ0.9mm, copper-wire φ1.6mm.
[PC5] steel-wire φ0.7mm, copper-wire φ1.6mm.

View More Details

Read More

plastik pipe cutter

PLASTIC PIPE CUTTERS (SNIP)

Part number

• PIP19 (Standard type)
• PIP20 (Heavy-duty type)
• PIP7Z (Slim type)
• PIP42 (Easy operation type)

 Feature

Operasi satu tangan untuk memotong pipa plastik.
Dapat memotong raceway permukaan plastik pada sudut yang diinginkan dengan attachment terpasang. (untuk PIP19 / PIP42)

Blade dapat dikunci dengan Stopper saat tidak bekerja demi keamanan. (untuk PIP42)
Pembukaan blade dengan menekan Release Lever. (untuk PIP42)

Cutting capacity:


[PIP19 /PIP42]φ42mm (Standard vinyl pipe VP30, Water pipe VW30, Electric wiring pipe VE36.)
[PIP7Z]φ26mm (Standard vinyl pipe VP20, Water pipe VW20, Electric wiring pipe VE22.)
[PIP20]φ63mm (Standard vinyl pipe VP50, Water pipe VW50, Electric wiring pipe VE54.)

Blade type:

[P18Z] for PIP19.
[P42] for PIP42.
[P7] for PIP7Z.
[P20] for PIP20.

Overall length:
[PIP19]217mm.
[PIP42]220mm.
[PIP7Z]185mm.
[PIP20]325mm.

View More Details  

Read More

heat nipper

 HEAT NIPPERS (FOR CUTTING PLASTICS)

Part numbe

• HT180 (Standard type)
• HT200 (Heavy-duty type)
• HT120 (End cutting type)
• HT130 (Long blade type)
• HT140 (Flat blade type)
• HT160 (for cutting narrow spaces)
• HT170 (Angle blade type)
• HT180DX (Standard type / with sensor)

                                                                           Feature

Pemanas built-in menghangatkan tepi pisau untuk memotong lebih mudah, bebas retak bahan rapuh seperti akrilik, plastik styrene, dan resin kaca.

Heat nipper ini harus digunakan dengan transformator yang sesuai.
Cutting capacity:
[HT180 /HT120 /HT130 /HT140 /HT160 /HT170 /HT180DX]φ4mm.
[HT200]φ7mm.

Heater type:
[W19] for HT180 /HT120 /HT130 /HT140 /HT160 /HT170 /HT180DX.
[W29] for HT200.

Transformer type:
[TRF25-100V] for HT180 /HT120 /HT130 /HT140 /HT160 /HT170 /HT200.
[TRF25-220V] for HT180 /HT120 /HT130 /HT140 /HT160 /HT170 /HT200.
[TRF25-240V] for HT180 /HT120 /HT130 /HT140 /HT160 /HT170 /HT200.
[TRF100D] for HT180DX.

Step-Down Transformer type:
[HDT100] for TRF25-100V .

Read More

nippers

MUROMOTO NIPPERS

Part number

• 205 / 205H (jepit daya tinggi untuk memotong kawat baja)
• 206S (jepitan flush cut untuk memotong kawat halus)
• 55S (electric nippers)
• 55SPM (electric nippers with holding type))
• XN200 (nippers for electrical work)
• 305 (nippers for hard wire)
• 405 (end cutting nippers)
• 450 (standard nippers)
• 550 (angle cutting nippers)
• WA1000 (compound cutting nippers)
• CT55 (carbide tipped nippers)
• CT305 (carbide tipped nippers)

Feature

 Cutting capacity:

[205-150 / 205H-150 / 206S-150] steel-wire φ2mm, copper-wire φ2.6mm.
[205-175 / 205H-175 / 206S-175] steel-wire φ2mm, copper-wire φ3mm.
[205-200 / 205H-200 / 206S-200] steel-wire φ2.6mm, copper-wire φ3.5mm.
[55S-120 / 55SPM-120] steel-wire φ0.8mm, copper-wire φ1.2mm.
[55S-150 / 55SPM-150] steel-wire φ1.5mm,
copper-wire φ2.6mm.
[XN200] steel-wire φ2.6mm, copper-wire φ3.5mm.
[305-7] steel-wire φ2.6mm, copper-wire φ3.5mm.
[305-8] steel-wire φ3.2mm, copper-wire φ4mm.
[405-7] steel-wire φ2mm, copper-wire φ3mm.
[405-8] steel-wire φ2.4mm, copper-wire φ3.2mm.
[405-9] steel-wire φ2.6mm, copper-wire φ3.5mm.
[450-125] steel-wire φ0.8mm, copper-wire φ1.2mm.
[450-150] steel-wire φ1.5mm, copper-wire φ2.6mm.
[550S-125] steel-wire φ0.9mm, copper-wire φ1.2mm.
[550-150] steel-wire φ1.6mm, copper-wire φ2mm.
[WA1000] steel-wire φ2mm, copper-wire φ2.6mm.
[CT55-120 / CT55-150] piano-wire φ0.5mm.
[CT-305-7] piano-wire φ1mm.
[CT305-8]  piano-wire φ1.2mm.

View More Details 

Read More

cutting plastik

PLASTIC NIPPERS

Part number

• 160S (high-plastic nippers / round type blade)
• 160SF (high-plastic nippers / flat type blade)
• 160SA (high-plastic nippers / angle type blade)
• 160FW (high-plastic nippers / extra thin blade)
• 66S (plastic nippers)
• 99 / 99S / 99SF (heavy-duty plastic nippers)
• 170S (angled plastic nippers)
• WA1000F (compound action plastic nippers)
• 68S (narrow nose plastic nippers)
• PG20 (pin gate plastic nippers)
• 2000EF / 23EF / 24EF / 25EF /26EF (end cutting plastic nippers)
• 550SF (angle cutting plastic nippers)
• L40 (long handle plastic nippers)
• M11 / M12 (miniature plastic cutting nippers)

 Feature

for nearly flush cutting of moulded plastic components from sprues.
with opening spring.

Cutting capacity:
[160S-125 / 160SF-125 / 160SA-125] φ3mm.
[160S-150 / 160SF-150 / 160SA-150] φ5mm.
[M11 / M12] φ3mm.
[160FW-125] φ2mm.
[160FW-150] φ4mm.
[66S-150] φ5mm.
[99-150 / 99S-150 / 99SF-150] φ8mm.
[99-175 / 99S-175 / 99SF-175] φ9mm.
[99-200 / 99S-200 / 99SF-200] φ10mm.
[170S-150] φ5mm.
[WA1000F] φ5mm.
[68S-125] φ2mm.
[PG20-125] φ1mm.
[2000EF / 23EF / 24EF / 25EF / 26EF] φ3mm.
[550SF-125] φ3mm.
[550SF-150] φ5mm.
[L40-190] φ5mm.
[M11 / M12] φ3mm.

Read More

air shears nile muromoto

MUROMOTO AIR SHEARS

       Part number

AS100 (standard type)
AS200 (standard type)
ASP150 (heavy-duty type)
ASP250 (heavy-duty type)
AM10 (machine-fitting type)
AM20 (machine-fitting type)


      Feature 
AIR SHEARS AS100
Length(less blade):140mm   Weight: 230g   Grip size: 36φmm   Air consumption:137㎤/stroke   Air pressure: 0.5～0.6MPa   Blade type: No.100S, No.100R   Cutting capacity: (plate) 0.5×15mm

AIR SHEARS AS200
Length(less blade): 182mm   Weight: 500g   Grip size: 45φmm   Air consumption:227㎤/stroke   Air pressure: 0.5～0.6MPa   Blade type: No.200S, No.200R   Cutting capacity: (plate) 0.8×25mm, 1.0×10mm

AIR SHEARS ASP150
Length(less blade): 212mm   Weight: 300g   Grip size: 36φmm   Air consumption:274㎤/stroke   Air pressure: 0.5～0.6MPa   Blade type: No.100S, No.100R   Cutting capacity: (plate) 0.5×20mm

AIR SHEARS ASP250
Length(less blade): 269mm   Weight: 720g   Grip size: 45φmm   Air consumption:508㎤/stroke   Air pressure: 0.4～0.6MPa   Blade type: No.200S, No.200R   Cutting capacity: (plate) 0.8×25mm, 1.0×15mm

AIR SHEARS AM10
Length(less blade): 129mm   Weight: 296g   Grip size: 36□mm   Air consumption:137㎤/stroke   Air pressure: 0.5～0.6MPa   Blade type: No.100S, No.100R   Cutting capacity: (plate) 0.5×15mm

AIR SHIARS AM20
Length(less blade): 159mm   Weight: 507g   Grip size: 45□mm   Air consumption:227㎤/stroke   Air pressure: 0.5～0.6MPa   Blade type: No.200S, No.200R   Cutting capacity: (plate) 0.8×25mm, 1.0×10mm

Air Shears Optional Blades:
[No.100S, No.100R] for AS100, ASP150, AM10
[No.200S, No200R] for AS200, ASP250, AM20
(※No.100S, No.200S : Blade tip pointed)
(※No.100R, No200R : Blade tip round)

View More details 

Read More

air fil saws nile muromoto

MUROMOTO AIR FIL-SAWS

 Part number

AF10S ( Stroke : 10mm )
AF7 ( Stroke : 7mm )
AF7S ( Stroke : 5mm )

 Feature

AIR FIL SAWS AF10S
Panjang: 201mm Berat: 750g Ukuran pegangan: □ 39 × 37mm Konsumsi udara: 280ℓ / menit Tekanan udara: 0.65MPa Kecepatan reciprocating: 5.500 stroke / menit Kapasitas pemotongan:

Plat logam 1mm: 1.000mm / menit Plat logam 3mm: 180mm / menit
AIR FIL SAWS  AF7 / AF7S
Panjang: 180mm Berat: 650g Ukuran pegangan: □ 39 × 37mm

Konsumsi udara: 280ℓ / menit Tekanan udara: 0.65MPa

Kecepatan reciprocating:

(AF7) 6,900 stroke / menit (AF7S) 8,400 stroke / menit

Kapasitas pemotongan:
(AF7) 1mm pelat logam: 900mm / mnt Plat logam 3mm: 135mm / mnt

(AF7S) 1mm pelat logam: 850mm / mnt Plat logam 3mm: 135mm / mnt


Ringan dan sunyi dalam pengoperasian.

Lubang masuk pelumas diatur agar mudah dilumasi.

Mudah menyesuaikan aliran udara.

Tidak ada getaran antara kepala dan dudukan untuk getaran minimum.

Selang udara lunak digunakan untuk pengoperasian yang nyaman.

Efisiensi pemotongan dan penyelesaian yang lebih  terjamin.

Accessories:
Saw blade

1. Steel straight cut type (AF1032). 2 pieces.
2. Steel circle cut type (R1032). 1 piece.

Files

1. Flat type (AFF50). 1 piece.
2. Round type(AFR50). 1 piece.
3. Triangular type(AFT50). 1 piece.

Optional accessories:
Saw blade

1. Steel straight cut type (AF1032). 10 pieces.
2. Steel circle cut type (R1032). 10 pieces.
3. Steel small-circle cut type (SR1036). 10 pieces.
4. Urethane bumper cut type (R1010). 10 pieces.
5. Timber Aluminium cut type(W1014). 10 pieces.

Files

1. Flat type (AFF50). 1 piece.
2. Round type(AFR50). 1 piece.
3. Triangular type(AFT50). 1 piece.

View More details 

Read More

mini belters muromoto

MUROMOTO MINI BELTERS

Part number

MB20S (standard type)
MB20 (for use in limited places or for spot sanding)
MB25 (lever type, belt width 20mm)
MB25S (lever type, belt width 10mm)

                                                      Mini Belters Feature

3-point belt supporting system offers easier and more smooth sanding operation for better finish.

• Mini Belters MB20S (standard type)

Length:290mm   Weight:1,080g   Air consumption:300l/min   Air pressure:0.5～0.6MPa   Free belt speed:2,200m/min   Belt size:20mm×520mm

• Mini Belters MB25 (for rear exhaust and for lever type, belt width 20mm)

Length:780mm   Weight:1,480g   Air consumption:300l/min   Air pressure:0.5～0.6MPa   Free belt speed:2,200m/min   Belt size:20mm×520mm

• Mini Belters MB25S (for rear exhaust and for lever type, belt width 10mm)

Length:780mm   Weight:1,350g   Air consumption:300l/min   Air pressure:0.5～0.6MPa   Free belt speed:2,200m/min   Belt size:10mm×520mm

2-point belt supporting system offers easier and more smooth sanding operation for better finish.

• Mini Belters MB20 (for use in limited places or for spot sanding type)

Length:290mm   Weight:930g   Air consumption:300l/min   Air pressure:0.5～0.6MPa   Free belt speed:2,200m/min   Belt size:20mm×520mm

Applications:
Sanding for various auto-repair services such as…
removing spot welding, removing paint off flat or curved surfaces, removing adhesives, removing welding bead.
Finishing wood work.
Deburring small metal products.
General finishing work.
Removing rust.
Other sanding and polishing work.

Optional accessories:
Abrasive cloth belts (Sanding belt of zirconia zesin)

• 40 (20 pieces): for MB20S, MB25, MB20
• 60 (20 pieces): for MB20S, MB25, MB20
• 100 (20 pieces): for MB20S, MB25, MB20
• 60-10 (20 pieces): for MB25S
• 100-10 (20 pieces): for MB25S

View More Details  

 

Read More

curl hose

MUROMOTO CURL HOSE

      Part number

• Curl Hose (standard type)
• Curl Hose (with straight hose type)
• Jumbo Curl Hose (G type)
• Mini Curl Hose (M type)
• Straight Hose (UH type)
•  Thickly Rolled Curl Hose (CHL type)
• Curl Hose (SE type)
• Curl Hose (GS type)
• Strech Curl Hose
• Large Diameter Strech Curl Hose
• Bala Curl

◎ Penampilan: Diameter luar adalah Ф28mm (tipe standar); karena itu ringan dan mudah di gunakan.
◎ Fleksibilitas: Fleksibel dan ringan （1/3 dari selang karet）; oleh karena itu pengoperasian genggaman mudah dan membuat pekerjaan Anda ringan.
◎ Elastisitas: Ini memiliki karakteristik tolakan tinggi dan dapat bertahan lama digunakan.
◎ Ketahanan aus: Ketahanan aus adalah 3-5 kali dari selang karet.
class="tlid-translation translation" lang="id">◎ Resistansi kimia ： Kecuali asam klorida, asam fosfat, asam sulfat, asam nitrat, dan soda kaustik, metil klorida, klor-aldehida non-manusia. Itu menggunakan bahan untuk yang terbaik yang bisa bertahan paling lama (30 hari direndam)
◎ Heat resistant：Up to 70 °C
◎ Tahan dingin: Tidak merusak fleksibilitas bahkan dalam kondisi -10 ° C
-10 ° C
◎ Tahan tekanan: Ini akan mentoleransi uji ekspansi dan kontraksi 300.000 kali atau lebih dalam tekanan udara 0.7MPa.
◎ Utilitas: Peralatan silinder, Pistol semprot pelapis, Peralatan industri, Mesin makanan, Peralatan medis, Alat pneumatik Umum.

View More Details

Read More

Cable Strippers

MUROMOTO CABLE STRIPPERS

Mesin otomatisasi Untuk pengupasan kabel listrik.

Ini adalah produk yang dapat bekerja secara efisien dengan investasi lebih sedikit. Siapa pun dapat dengan mudah bekerja dan dapat mempersingkat jam kerja.
[Recommended type of industry]

• Harness line processing, suchas an automobile
• Electric cable processing of vehicle charging station
• Terminal processing of electric cable for houses
• Terminal processing of the household electrical appliance
• Electric cable processing of Solar-related

                                                                                          
CABLE STRIPPERS CST35
It’s suitable for the high-speed stripping of the thin cable.
Stripping capacity : up to φ5mm outer dia.
Stripping length : 35mm
Weight : 7.4kg
Length : 270mm
Air Pressure : 0.5～0.6MPa

[Only the CST35 has standard spare blade set]
RW1.25-2.0 (for 1.25sq , 2.0sq)
RW3.5-5.5 (for 3.5sq , 5.5sq)
S0 (for S zero)



 CABLE STRIPPERS CST100 
It can perform thecomplexstripping
.Strippingcapacity : up to φ15mm outer dia.
Stripping length : 100m.Weight : 13.5kg
Length : 420mm
Air Pressure : 0.5～0.6MPa

CABLE STRIPPERS CST110
Safety cover is attached. It can smoothen the discharge of waste.
Stripping capacity : up to φ15mm outer dia.
Stripping length : 100mm
Weight : 21kg
Length : 470mm
Air Pressure : 0.5～0.6MPa

CABLE STRIPPERS CST120
It is suitable for stripping of large diameter cable.
Stripping capacity : up to φ30mm outer dia.
Stripping length : 100mm
Weight : 43kg
Length : 490mm
Air Pressure : 0.5～0.6MPa

[Optional blade]
R-type : standard blade
D-type : for oval-shape cables
S-type : for cables of small diameter
V-type : for cables of with core wire of small diameter

[Order procedure]
Please send us a drawing or processing sample, a cable that stripping.
↓
We select the model and submit the estimate of the spare blade.

View More Details 

                                                           

Read More

Air Shot Hammer

AIR SHOT HAMMER

         Part number

• RH25 (Standard type)
• RH80 (Standard type)
• RH90 (Standard type)
• RH100Z (Heavy duty type)
• RH200 (Heavy duty type)

AIR SHOT HAMMER RH25

Overall length:213mm   Weight:900g   Grip size:φ37mm
Air consumption:135cm³/stroke   Blowing power:(approx)360N
Recommended air pressure: 0.5～0.7MPa

AIR SHOT HAMMER RH80

Overall length:254mm   Weight:1,300g   Grip size:φ45mm
Air consumption:135cm³/stroke   Blowing power:(approx)370N
Recommended air pressure: 0.5～0.7MPa

AIR SHOT HAMMER RH90

Overall length:328mm   Weight:1,600g   Grip size:φ43mm.Air consumption:651cm³/stroke Blowing power:(approx)460N
Recommended air pressure: 0.5～0.7MPa

RH100Z
Overall length:330mm   Weight:2,100g
Grip size:φ43mm   Tank size:φ72mm
Air consumption:651cm³/stroke   Blowing power:(approx)470N
Recommended air pressure: 0.5～0.7MPa

AIR SHOT HAMMER RH200

Overall length:341mm   Weight:2,100g
Grip size:φ51mm   Tank size:φ86mm
Air consumption:653cm³/stroke   Blowing power:(approx)620N
Recommended air pressure: 0.5～0.7MPa

Single blow (each operation of the lever generates one blow)
It can be used for stamping, riveting and chipping, by changing the attachments.

Optional accessories: Standard rivet snap (RVS85)

View More Details

Read More

Air Heat Cutter

AIR HEAT CUTTERS

Feature

 AH20 / AH30 (Tipe pemanas ganda)
AH5 / AH8 (Jenis pemanas tunggal)

1.  Cocok untuk memotong bahan yang mudah pecah seperti Acryl dan Glass resin, dll.
2. Bak persegi mudah diatur ke dudukan atau mesin.
3.  Sangat diperlukan untuk pekerjaan molding resin.
4. Di operasikan menggunakan selenoid valve dan food valve (FB70S)
5. Kecepatan pemotongan dapat disesuaikan melalui regulator udara.
6. Double-Pemanas dapat mengatur suhu dalam rentang yang luas antara 70-200 ℃ agar sesuai dengan setiap gerbang resin pada suhu yang paling cocok.
7. 3 model blade yang dapat diganti tersedia untuk menyesuaikan berbagai jenis pekerjaan pemotongan.
8. …AH20 and AH30 terbatas

Cutting Capacity:

• [AH20]φ6mm.
• [AH30]φ7mm.
• [AH5]φ3mm.
• [AH8]φ4mm.

Optional blade:

• [FA20S /FA20L /FA20C] for AH20.
• [FA30S /FA30L /FA30C] for AH30.
• [FA5] for AH5.
• [FA8] for AH8.

Optional transformer:
[HTR100W] for AH20 /AH30.
[HTR30N-100V] for AH5 /AH8.
Optional heater:

• [W19W] for AH20 /AH30.
• [W19] for AH5 /AH8.

Trafo Step-Down Opsional: [HDT100]. Trafo tipe Step-Down ini diminta untuk digunakan dalam kombinasi dengan trafo standar kami HTR30N-100V dan HTR100W untuk alat-alat listrik standar 100V Jepang ketika dioperasikan di negara-negara luar negeri standar 220V ~ 240V.

View More Details

Read More

Square Air Cutters Muromoto

SQUARE AIR CUTTERS

 

Berikut ini adalah berbagai macam pemotong pneumatik "NILE" untuk membantu Operator mencapai produktivitas yang lebih tinggi dan penghematan biaya yang luar biasa dalam memotong, memeras, menekan, menekuk pekerjaan untuk industri modern.

Dilengkapi dengan berbagai jenis pisau pemotong yang dapat diganti, pemotong pneumatik ini serbaguna untuk di terapkan diberbagai aplikasi.

Bentuk square air nipper muromoto berbentuk persegi memiliki banyak lubang untuk memasang baut pada mesin atau dudukan jig.

• MS3 / MS3G (minimum size)
• MS5 / MS5G (extra small size)
• MS10 / MS10G (small size)
• MS20 / MS20G (medium size)
• MS30 / MS30G (large size)
• MSP20 / MSP20G (medium size) (heavy-duty type)
• MSP30 / MSP30G (large size) (heavy-duty type)

View More Details

MS3 / MS3G

Length:(MS3)110mm :(MS3G)101mm
Weight:(MS3)100g :(MS3G)75g　Grip size:□20mm
Air consumption:31cm³/stroke　Power:(approx.)265N
Air pressure:0.4～0.5MPa
Cutting capacity: steel-wire φ0.4mm, copper-wire φ0.8mm, piano-wire φ0.3mm, soft-plastic φ1mm


MUROMOTO SQUARE AIR CUTTERS MS5 / MS5G
Length:(MS5)94mm :(MS5G)89mm
Weight:(MS5)160g :(MS5G)141g　Grip size:□30mm
Air consumption:56cm³/stroke　Power:(approx.)390N
Air pressure:0.4～0.5MPa
Cutting capacity: steel-wire φ0.5mm, copper-wire φ1mm, piano-wire φ0.3mm, soft-plastic φ2mm

MUROMOTO SQUARE AIR CUTTERS MS10 / MS10G
Length:(MS10)113mm :(MS10G)117mm
Weight:(MS10)260g :(MS10G)254g　Grip size:□36mm
Air consumption:105cm³/stroke　Power:(approx.)580N
Air pressure:0.4～0.5MPa
Cutting capacity: steel-wire φ1mm, copper-wire φ1.6mm, piano-wire φ0.5mm, soft-plastic φ4mm, hard-plastic φ2.6mm

MUROMOTO SQUARE AIR CUTTERS MS20 / MS20G
Length:(MS20)129mm :(MS20G)136mm
Weight:(MS20)430g :(MS20G)425g　Grip size:□45mm
Air consumption:268cm³/stroke　Power:(approx.)1,370N
Air pressure:0.5～0.6MPa
Cutting capacity: steel-wire φ2mm, copper-wire φ2.6mm, piano-wire φ1mm, soft-plastic φ7mm, hard-plastic φ5mm


MUROMOTO SQUARE AIR CUTTERS MS30 / MS30G
Length:(MS30)170mm :(MS30G)177mm
Weight:(MS30)810g :(MS30G)788g　Grip size:□56mm
Air consumption:631cm³/stroke　Power:(approx.)2,740N
Air pressure:0.5～0.6MPa
Cutting capacity: steel-wire φ2.8mm, copper-wire φ3.3mm, piano-wire φ1.2mm, soft-plastic φ10mm, hard-plastic φ6.5mm

MUROMOTO SQUARE AIR CUTTERS MSP20 / MSP20G
Length:(MSP20)216mm :(MSP20G)223mm
Weight:(MSP20)650g :(MSP20G)648g　Grip size:□45mm
Air consumption:459cm³/stroke　Power:(approx.)1,960N
Air pressure:0.4～0.5MPa
Cutting capacity: steel-wire φ2mm, copper-wire φ2.6mm, piano-wire φ1mm, soft-plastic φ7mm, hard-plastic φ5mm

MUROMOTO SQUARE AIR CUTTERS MSP30 / MSP30G
Length:(MSP30)262mm :(MSP30G)269mm
Weight:(MSP30)1,220g :(MSP30G)1,115g　Grip size:□56mm
Air consumption:1,146cm³/stroke　Power:(approx.)4,410N
Air pressure:0.5～0.6MPa
Cutting capacity: steel-wire φ4mm, copper-wire φ4.8mm, piano-wire φ1.2mm, soft-plastic φ13mm, hard-plastic φ6.5mm


Optional blades: Initial of the blade number corresponding to the cutting of
steel-wire is the “S,P,CR,EP”
copper-wire is the “S,CR,EP”
piano-wire is the “Z”
plastic is the “F,FD”

Special blades: Even a piece of any type of special blade can be designed and manufactured to meet your particular application. Samples of actual work pieces are required on inquiry for designing and quoting.

Read More

Muromoto Nile Air Cutter

MUROMOTO AIR CUTTERS

Here is a wide range of "NILE" air cutters to help you achieve higher productivity and remarkable cost saving in cutting, squeezin
Equipped with different types of replaceable cutting blades, these air cutters can be versatile for various applications.

g, pressing, bending and punching jobs for modern industries.





View More Details

• MR3 (minimum size)
• MR5 (extra small size)
• MR10 (small size)
• MR20 (medium size)
• MR30A (large size)
• MR50AK (extra large size)
• MR50FK (extra large size for plastic cutting)
• MP25A (medium size) (heavy-duty type)
• MP35A (large size) (heavy-duty type)
• MP55AK (extra large size) (heavy-duty type)

AIR CUTTERS SMR3
Length:112mm　Weight:90g　Grip size:φ20mm
Air consumption:31cm³/stroke　Power:(approx.)265N
Air pressure:0.4～0.5MPa
Cutting capacity: steel-wire φ0.4mm, copper-wire φ0.8mm, piano-wire φ0.2mm, soft-plastic φ1mm

AIR CUTTERS MR5
Length:104mm　Weight:130g　Grip size:φ30mm
Air consumption:41cm³/stroke　Power:(approx.)390N
Air pressure:0.4～0.5MPa
Cutting capacity: steel-wire φ0.5mm, copper-wire φ1mm, piano-wire φ0.3mm, soft-plastic φ2mm

AIR CUTTERS MR10
Length:124mm　Weight:200g　Grip size:φ36mm
Air consumption:105cm³/stroke　Power:(approx.)580N
Air pressure:0.4～0.5MPa
Cutting capacity: steel-wire φ1mm, copper-wire φ1.6mm, piano-wire φ0.5mm, soft-plastic φ4mm, hard-plastic φ2.6mm

AIR CUTTERS MR20
Length:155mm　Weight:340g　Grip size:φ45mm
Air consumption:268cm³/stroke　Power:(approx.)1,370N
Air pressure:0.5～0.6MPa
Cutting capacity: steel-wire φ2mm, copper-wire φ2.6mm, piano-wire φ1mm, soft-plastic φ7mm, hard-plastic φ5mm


AIR CUTTERS MR30A
Length:191mm　Weight:520g　Grip size:φ56mm
Air consumption:631cm³/stroke　Power:(approx.)2,740N
Air pressure:0.5～0.6MPa
Cutting capacity: steel-wire φ2.8mm, copper-wire φ3.3mm, piano-wire φ1.2mm, soft-plastic φ10mm, hard-plastic φ6.5mm

AIR CUTTERS MR50AK
Length:237mm　Weight:1,290g　Grip size:φ75mm
Air consumption:1,285cm³/stroke　Power:(approx.)4,700N
Air pressure:0.5～0.6MPa
Cutting capacity: steel-wire φ4.5mm, copper-wire φ5.5mm, piano-wire φ1.6mm, soft-plastic φ11mm, hard-plastic φ8mm

AIR CUTTERS MR50FK
Length:198mm　Weight:1,170g　Grip size:φ75mm
Air consumption:1,212cm³/stroke　Power:(approx.)4,100N
Air pressure:0.5～0.6MPa
Cutting capacity: soft-plastic φ12mm, hard-plastic φ6.5mm

AIR CUTTERS MP25A
Length:242mm　Weight:560g　Grip size:φ45mm
Air consumption:459cm³/stroke　Power:(approx.)1,960N
Air pressure:0.4～0.5MPa
Cutting capacity: steel-wire φ2mm, copper-wire φ2.6mm, piano-wire φ1mm, soft-plastic φ7mm, hard-plastic φ5mm


AIR CUTTERS MP35A
Length:283mm　Weight:830g　Grip size:φ56mm
Air consumption:1,146cm³/stroke　Power:(approx.)4,410N
Air pressure:0.5～0.6MPa
Cutting capacity: steel-wire φ4mm, copper-wire φ4.8mm, piano-wire φ1.2mm, soft-plastic φ13mm, hard-plastic φ6.5mm

AIR CUTTERS MP55AK
Length:370mm　Weight:2,000g　Grip size:φ75mm
Air consumption:2,569cm³/stroke　Power:(approx.)7,740N
Air pressure:0.5～0.6MPa
Cutting capacity: steel-wire φ6mm, copper-wire φ7mm, piano-wire φ2mm, soft-plastic φ11mm, hard-plastic φ8mm

Optional blades: Initial of the blade number corresponding to the cutting of
steel-wire is the “S,P,CR,EP”
copper-wire is the “S,CR,EP”
piano-wire is the “Z”
plastic is the “F,FD”

Special blades: Even a piece of any type of special blade can be designed and manufactured to meet your particular application. Samples of actual work pieces are required on inquiry for designing and quoting.

Read More