Magnetic Separator Unimag MSK

EASY SUPER

MAGNETIC SEPARATOR

View More Detail

DESCRIPTION 

We provide Coolant Filtration System, Magnetic Separator and Super Easy Scrape Magnetic Separator with high quality.

1. Taiwan Coolant Filtration Supplier. 
2. Ferrous contaminant can be attracted, squeezing, and discharged automatically. No filter media consumption in the coolant filtration system.  
3. Use rare earth magnets, whose magnetic force is 8 times stronger than Ferrite magnets.

FEATURES

1. It can attract contaminants with weak magnetic force, such as cemented carbide, carbon.
2. It works excellently with oil coolant. Second filtration process is not necessary. 
3. No magnetic force near scraper, so contaminants are easy to be discharged. 
4. You can adjust the upper scraper while it is wearing.

SPECIFICATION

1. Capacity: 20, 30, 40, 60, 80, 100, 150, 180, 240,300L/MIN.
2. Stainless Steel frame. Motor's position can be on either left or right side. 
3. Position of fluid outlet is on left, right side, or bottom.

Read More

Magnetic separator Unimag MCJ

Duck Magnetic Separator Suppliers

Duck Magnetic Separator equipped with a magnetic roller that attracts contaminants from coolant, then dried and discharged. No filter media consumption in the Coolant Filtration System.

View More Details

Duck Magnetic Separator

FEATURES

1. Ferrous contaminant can be attacted, pressed, and discharged automatically. No filter media consumption.
2. Use superior ferrite permanent magnets and by test magnetic circuit design, the attractive forces are the best among similar products. 
3. External area of magnetic drum is filled with magnetic force, perform best in filtration process.
4. Frame is die-cast by aluminum-alloy. Super appearance and leak-proof. Un-attractive to magnetic force (except MCJ-240A). 
5. The magnetic drum can attract the impurities from the coolant. After squeezing, it can be discharged automatically and witout any consumption. 
6. You can adjust the upper scraper while it is wearing. 
7. If you want to filter the carbide, carbon remover of headened steel and oil coolant. we suggest you to purchase super magnetic separator MCJ-**HK.

Specification :

• Applicable to Machines:
• Surface Grinder
• Centerless Grinder
• Internal/External Grinder
• Honing Machine
• Thread Grinding Machine 
• Gear Grinding Machine 
• Polisher
• Filtration Efficiency: 50 Micron
• Capacity: 40L/Min-240L/min

 

Read More

Dust Collector

Dust And Mist Collector

DESCRIPTION 

1. High-efficient revolving impeller works and use rough, middle, fine and HEPA multilevel filtration material to filter dust and mist. Filtration efficiency reaches 99.97%. Themultilevel of filtration material can filter mist and dust through cutting and grinding process, no block and filtration material easy to be replacement. 
2. The reusable rough filtraion material can be cleaned.

View More Detail

Features

The Dust And Mist Collector can solve the problem as following:
1. Allergy and headache caused by sucking mist and dust.
2. Injuries because mist and dust sprayed on the ground make workers silp accidentally.
3. Reduction of productivity: Workers lack working will in the place around dust and mist.
4. Environment pollution and energy waste
5. Fire sensor lose function while covered by mist and oil. 5. Electric cabinet of machine tools damages.

Read More

Coolant Through Spindle series

BF830-CTS

Coolant Through Spindle Series

CTS High Pressure Device

 

 

 View More Details

 DESCRIPTION
This series of CTS High Pressure Device features its excellent performance.

1. Applicable to machining center with Coolant Through the Spindle (CTS). Small space occupied (only 815*815mm) 
2. Two sets of 8"*30"bag filter units for primary filter, filtering capacity is 5-10 micron; on-line bag-changing. 
3. Equipped with level switch; auto water-supplementary; light alarm while at abnormal.

Specification

1.  Recommend: 1 HP water-supplementary pump, which is 60LPM of flowrate and 3 kg/cm2 of pressure. 
2. High-pressure flowrate: 30LPM(60HZ) or 26LPM(50HZ). High pressure pump acpacity: 5 HP at 50kg/cm2 of pressure, and 7.5HP at 70 kg/cm2 of pressure. 
3. Apply the WANNER(USA) rotary diaphrapm pump, which allow for an impurity below 0.5mm.

Read More

Candle Filter Unimag

CFMP

Portable Candle Filter

CFMP

   View More Details

DESCRIPTION

Filtration efficiency: 1~3 micron, suitable for coolant of EDM and tool grinder.

 

 

Features

1. Coolant Filtration system for EDM and grinding fluid.
2. Each candle-like filter element is composed of thousands of thin wafers and composed tightly by springs. When dirty fluid passes through tiny gaps between wafers, all prticles over one micron is trapped on the outside edge of filter elements. Filter efficiency reaches 1~3 micron. 
3. Automatically cleaned by a rapid backwash cycle. Use air to blow out particles trapped on elements and then deposit them into a sludge collecting basket.
4. The replaceable filter elements’ life lasts several years. (Please use recommended circulation oil.)

 

Read More

Magnetic Separator MCA SERIES

Magnetic Separator Suppliers

DESCRIPTION

1.  The Magnetic Separator is suitable for heavy duty grinding. 
2. No filtration media consumption in the Coolant Filtration System. 
3. The lowest cost for purchasing Coolant Filtration System. 
4. Easy to fit in other Filtration Devices as a previous filtration process.

View More Detail

Specification :

Capacity: 240-1000L/MIN.

Read More

pneumatic level gauge manufacturers

LG-40

Pneumatic Level Gauge Manufacturers

View More Details 

DESCRIPTION

   Pneumatic Level Gauge is to detect level in a open tank, especially for dirty or sticky fluid. Low cost and long life.

Features

1. The Pneumatic Level Gauge detects difference of air pressure and pushes diaphragm and limited switch. 
2. Very easy to install on tanks's top.

Specification

1.  Enlarge detecting tube when encounting high-viscosity fluid., or smaller tube will cause late reflection.
2. Applicable to temparature from 0-60 degree.

Read More

Oil Skimmer Belt

BELT OIL SKIMMER OSA

Belt Oil Skimmer

 

 View More Details

DESCRIPTION
In addition to Net Type Oil Skimmer, we also offer Super Magnetic Sludge Separator and Belt Type Oil Skimmer. Floating oil on coolant surface is removed by a stainless steel net, preventing coolant from deterioration.

FEATURES

The Net Type Oil Skimmer is equipped with oil/water separating tank, removing floating oil only and clean coolant draining back to coolant tank.

Specification

• Stainless steel net: 100mm, Motor: 25W, Speed reducing motor ratio: 1/180 (specific specification is available)

Read More

Hydrocylone unimag

HYDROCYCLONE

Hydrocyclone

 View More Details

DESCRIPTION
Hydrocyclone is a device using pump to supply pressure and high speed to inject coolant into tube of a special design where ascending/descending vortexes are created. Clean coolant will be drained out through ascending vortex while impurities will be precipitated by descending vortex. Excellent filtration effect up to 98%; low maintenance and long duration. The Coolant Filtration System is especially applicable to centerless grinder.

 

 

 Features 

1. Long duration- tungsten shaft of pump and lower nipple of ceramic material. Easily replacable with bare bands.
2. Separate contaniments from coolant, reducing water replacement frequency and triming demand for grinding wheel, and producing smoother workpiece surface. 
3. Ideal for filtering ferrous and nonferrous materials.

Read More

Centrifuge

Centrifuge , Coolant Filtration System

 

View More Detail

DESCRIPTION

Centrifuge is to pour the coolant that contains contaniments into a high speed rotary body. Because coolant with contaniment has larger gravity than ordinary, when rotating the contaniments will attach on the wall of rotary body due to centirfugal force. Then clean coolant flow out from the center of body.

Features 

1. Contaniments in coolant are easy to be cleaned.
2. The coolant filtration system is easy to separate powder of carbide, glass, aluminum, stainless steel, graphite, quartz from coolant. 
3. No consumption on filter media. Additive will not be separated. 
4. It works for oil and water-based coolant.

Specification :

Available for manual and semi-automatic type.
1. Manual type: CL-50 and CL-80.
2. Semi-automatic: CL-60, CL-100 and CL-150.
3. See CLA-100 for automatic type centrifuge.

 

Read More

Bag Filter

BF-300

Bag Filter

View More Details 

DESCRIPTION

This series of Bag Filter provides the maximum stability. Filtration precision depend on specification of filtration bag:1μ、3μ、5μ、10μ、15μ、25μ、50μ、75μ

Specification :

Size: 8"*30" Inlet and outlet: PT2"

 

 

 

Read More

oil skimmer disc type

Disc Type Oil Skimmer DS-2030

DESCIPTION
We have rich experience in manufacturing various kinds of Oil Skimmer such as Disc Type Oil Skimmer, Belt Type Oil Skimmer and Net Type Oil Skimmer.

1. The Oil Skimmer removes floating oil on coolant surface by a stainless steel plate, preventing coolant from deterioration. 
2. Equipped with oil/water separating tank, removing floating oil only and clean coolant draining back to coolant tank.

Features :

1. The plate is made of special material that attract oil, never broken.
2. Equipped with synchronous motor that slips while overload.

Specification :

Plate diameter is 200mm, 250mm, or 300mm. Motor position is either left or right side, easy to be installed.

Read More

Magnetic Separator MCJ Series

DUCK MAGNETIC SEPARATOR

1. Gunakan magnet permanen ferit unggul dan dengan desain sirkuit magnet terbaik, gaya tarik  menarik adalah yang terbaik di antara produk serupa.
2. Area luar drum magnetis diisi dengan gaya magnetis, perfom terbaik dalam proses penyaringan.
3. Frame die-cast oleh aluminium-alloy. Penampilan super dan anti bocor. Tidak menarik bagi gaya magnet.
4. Anda dapat menyesuaikan scraper atas saat dikenakan.
5. Drum magnetik dapat menghilangkan kotoran dari pendingin. Setelah melewati drum separator 
6. Jika Anda ingin menyaring karbida, penghapus cabon dari baja yang keras dan pendingin oli, kami sarankan Anda untuk membeli MCJ separator super magnetik

APPLICABLE TO MANCHINES

1. Surface Grinder
2. Centerless Grinder
3. Internal / External Grinder
4. Honing Machine
5. Tread Grinding machine
6. Gear Grinding Machine
7.  Polisher

Read More